Where may I apply ceramic brake pad grease, and which surfaces must stay clear?

By the Atkinson Oil Co. product team (IGNIS Overseas Ltd, Isleworth, UK). Claims reviewed by IGNIS Product & Compliance on 14 Nov 2026. Last updated: 14 November 2026.

Short answer. Atkinson Ceramic Brake Pad Grease is a high-temperature anti-seize and assembly grease for brake components. Use it where the vehicle maker allows: the back of the pad and the metal contact points of the pad. Keep it off brake discs and pads' friction faces. Rubber seals and boots get Red Rubber Grease, not this one.

Brakes are safety-critical. If you are not sure, have a qualified mechanic do the job.

Key facts

Where it may go (if the maker allows)

• The back of the pad backing plate and shims, where they meet the piston or caliper fingers.
• Metal-to-metal contact points: pad ears, abutments and guides.
• Brake fixing threads the maker allows to be lubricated (as anti-seize).

Where it must never go

• Disc faces.
• Pad friction material.
• Any friction surface.

Slide pins. Many slide pins run in rubber bushes and boots. Use the grease the vehicle maker names for slide pins. If it calls for a rubber-compatible grease, look at Red Rubber Grease (A1-06), not this one.

How to apply

1. Clean the parts and let them dry.
2. Apply a thin film only on the allowed points.
3. Wipe away anything that could reach the disc or friction material.
4. Reassemble, bed in the brakes as the maker directs, and test before normal driving.

Ceramic or copper? Both are labelled for brake parts. Some makers ask for a copper-free product on brakes — then Ceramic Grease is the one of ours to use. See Where can I use copper grease around brakes, and where must I avoid it?.

Caution: avoid contact with eyes; do not ingest; wash hands after use; keep out of reach of children; keep off brake discs and pads. Store cool and dry.

Product link: Ceramic Brake Pad Grease · Kit: Brake Service Kit (Ceramic + Copper).

Sources

Printed product label; Your equipment maker's manual